Single-phase voltage stabiliser 30kVA and 230Vac output, electromechanical stabiliser driven by a servomotor.
It provides a constant voltage by correcting the voltage drops and rises of the network in the internal structure. They operate fully automatically for voltage regulation without user intervention, which is achieved by continuously measuring the input mains voltage and automatically performing the necessary step-up/step-down operations to provide the constant voltage required for normal operation. Very suitable for all kinds of applications, including electrical machines with motors.
Single-phase voltage stabiliser 30kVA and 230Vac output, electromechanical stabiliser operated by a servomotor. It provides a constant voltage by correcting the voltage drops and rises of the network in the internal structure. They operate fully automatically for voltage regulation without user intervention, which is achieved by continuously measuring the input mains voltage and automatically performing the necessary step-up/step-down operations to provide the constant voltage required for normal operation. Very suitable for all kinds of uses, including electrical machines with motors. It has an LED display of input and output voltage, as well as equipment status indicators.
Voltage stabilisers are frequently used to power equipment sensitive to voltage variations or to solve problems in installations with large voltage variations due to power line problems.
The advantage of this type of electromechanical stabiliser is that it tolerates occasional overloads without damaging the equipment, such as those caused by starting electric motors. Despite this, it is necessary to install a magnetothermal device at the output to protect against long-term overloads. It should also be noted that this type of stabiliser does not distort the output sine wave.
These stabilisers are designed to operate at 100% power in continuous operation, although it is important to take into account the power factor of the installation.
The input voltage range is from 140 to 250Vac, providing a constant output voltage of 230Vac ±0.5%.
Technical data:
Manufacturer/Supplier: Guven-is/ Sevein
Reference: M1-30000
Power: 30kVA (30000VA)
Input voltage correction range: 140-250Vac
Input voltage operating range: 90-285V
Operating frequency: 47-64HZ
Input protection: Overcurrent protection. Low and high voltage protection
Output voltage: 230V+/- 0.5%.
Overload: 10 seconds % 200 load
Correction rate / recovery rate: - 90 Volt / S (range 150-250VAC)
Output waveform : Pure Sine
Output protection: Overcurrent. Low and high voltage protection
Low voltage output protection: 195V on - 175V off
High voltage output protection: 245V on - 250V off
Operating principles: Servo motor - Microprocessor - Dynamic servo
Cooling: Natural air system
Continuous operating time at full load: 0...105%.
continuous load
Efficiency under load: > 96
Mechanical bypass: Manual control network / 1-0-2 switch / remote switch / on-off lockout key
Degree of protection: IP21
Dimensions : 60x64x86cm
Weight : 150kg