Our modules for chilled water air conditioning
Equipped with two completely independent refrigerant circuits and 4 scroll compressors, the DAIKIN DT 200 D chiller is ideal for a variety of comfort and process applications. Providing a cold power of 200 Kw and a nominal flow rate of 9.6 liters per second, the DAIKIN DT 200 D multi-scroll chiller has an operating temperature range of -18 to +45°C. The DT 200 D model is distinguished by its V-shaped condensers which give it a reduced size. Fitted with a 400 volt three-phase power supply, the DAIKIN DT 200 D multi-scroll chiller uses an R32 type refrigerant.
The Trane heat exchanger is designed for easy connection to your site's water circuit. Its design maximizes recoverability while maintaining original system performance and reliability. The recovered energy can be used to heat a space, defrost or pre-heat boiler water.
R-410A refrigerant Compact design and small footprint for outdoor installation Sheet metal frame RAL 7024 - 7035 2 or 3 refrigerant circuits Electronic expansion valves New generation high efficiency SCROLL compressors High efficiency brazed plate heat exchangers (sizes 602 to 2000) High efficiency tubular heat exchangers (sizes 2100 to 2800) High efficiency micro-channel all-aluminum air-cooled condenser. Propeller fan with optimized profile composite blades Variable speed fans as standard equipment on the HE version Electrical cabinet fitted with remote control transformer, safety switch and numbered wiring. Connect Touch (sizes 602 to 2000) or Connect3 (sizes 2100 to 2800) controller with many self-adaptive functions.
Refrigerant: R-32 scroll air-cooled Compressor: scroll, fixed speed Nominal cooling capacity: 170-940 kW AquaSnap chillers are the best solution for commercial and industrial applications where installers, offices and Studies and end customers demand optimum performance with reduced installation costs. - High efficiency at full load and at partial loads - Compact and easy to install - Very low noise levels - Very low environmental impact - High reliability - Heat recovery and free cooling options
150-400 TR (530-1,406 kW) Standard VSD integrated compressor with 50% fewer moving parts Excellent capacity control, high power factor and soft start.
The revolutionary NexusⓇ Modular Hybrid Chiller is the world's first smart, plug-and-play, modular hybrid fluid cooling system for HVAC and light industrial applications. Breaking what you know about traditional hybrid liquid chillers, it can automatically optimize water and energy savings while providing the lowest installation costs, lowest operating costs, maximum uptime , lowest maintenance costs and best water quality in a simplified, compact and lightweight design. Thermal capacity: 19 - 180 tonnes1 Hybrid // Modular // EC ventilation system REQUEST A QUOTE Download Brochure
Certifications The units are CE marked, in accordance with current European directives concerning manufacturing and safety. On request, the units can be produced in compliance with the laws in force in non-European countries (ASME, GOST, etc.), and for other applications, such as the navy (RINA, etc.). Versions This range is available in HIGH EFFICIENCY (XE) version: 12 sizes to cover a range from 158 to 624 kW with an EER up to 3.04 and ESEER up to 4.74 in cooling mode and from 173 to 674 kW in heating with a COP up to 3.30.
a) Cooling mode: Evaporator water temperature = 12/7°C b) Heating mode: Condenser water temperature 40/45°C, Outdoor air temperature 7°C c) Following the EU 2015/1095 ecodesign regulation on process chillers, outlet water temperature standardized at -8°C, in accordance with EN 14825 and for EU regulation 813/2013 on heating appliances, outlet water temperature standardized at 7°C, in accordance with EN 14825